Plastisol coated for easier handling. 100 psi maximum inlet pressure. Air consumption 28 SCFM at 90 psi. 3/8" air connection. Air line filter, pressure regulator and automatic oiler recommended. External muffler.
Pumping of flammables or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state, and local safety codes including FFPA 30 - NFPA 77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less i required for safe liquid transfer. Use only mettalic drum, vessel and metallic pump (SP-SS) when pumping flammables. Air motors are not recognized under any current Underwriter's laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.
SP-A2 Data Sheet (PDF File)
