For all pump models to hold pump in vertical position and avoid exposure of motors to corrosive fumes. Available in PVC for plastic pumps and SS models.

Model 9001 (PVC)
Model 9002 (SS)

Vinyl coated and 16 ga. steel, our wall bracket is recommended for pump storage. Proper storage will increase the life expectancy of your pump and motor.

Model 9006

To securely hold discharge hose to tank flange or drum when filling. Prevents spoillage and siphoning. Entire assembly is 316SS with hose clamp welded to hand clamp. Ends of clamp have a lip for gripping drum flange. Hose size 1" to 1-1/2" -- 22 lbs. required to open clamp -- 7" long.

Model 9005

An absolute necessity when pumping flammables. Each set includes 2 - 6 ft. and 1- 10 ft. 16 ga. wires with heavy duty battery clamps on each end. For use on SS pump only.

Model 9003

Battery powered electronic digital flowmeters combine micro processing technology with rugged and accurate turbine flow sensor design. Power is supplied by 2 AAA batteries (included) averaging 2,000 hours of intermediate use. LCD display automatically turns on when flow appears and turns off four minutes after flow ceases. 1" NPT female connections. Pressure drop 2 psig @ 30 GPM.

• Measures flow rate and total flow separately.
• 316SS body, ferrite, ceramic, and SS retaining ring.
• PVDF body, ferrite, ceramic, and SS retaining ring.
• Factory calibrated ± 1.5% accuracy. ± .05% repeatability. 3 to 50 GPM -- 10 to 190 LPM
• Dimensions 4" x 2.5" (10.2 cm x 6.4 cm x 5.1 cm).

The 1/3 turn PP nozzle with TFE seats provides controlled dispensing without splashing for safe chemical transfer. Ideal for dispensing into small containers. Full one inch flow tru for maximum flow. Smooth union ball allows total shut off or minimum flow as needed. Body PP -- Seats PTFE -- )-ring Viton. Includes 3/4" and 1" hose barbs and SS hose clamp.

Model 9010

Recommended when pumping dirty or contaminated chemicals where abrasive particles are present. Constructed of PP or SS

Model 9011
Model 9012